Priyadharsan A | Materials Science | Editorial Board Member

Assist Prof. Dr. Priyadharsan A | Materials Science | Editorial Board Member 

 Saveetha Dental College and Hospitals | India

Priyadharsan Arumugam is an accomplished Indian physicist specializing in nanomaterials, photocatalysis, and green nanotechnology, currently serving as Assistant Professor of Physics at E.R.K. Arts and Science College, Dharmapuri, a position he has held since October 2019. He earned his Ph.D. in Physics from Periyar University in 2019 after completing his M.Sc. from Government Arts College, Coimbatore, and B.Sc. from Sri Vidya Mandhir Arts and Science College. In addition to his teaching career, he served as a Post Doctoral Fellow at the Centre for Nanotechnology System, BRIN, Jakarta from December 2023 to November 2024, and earlier worked as Assistant Professor–Research at Saveetha Dental College and Hospital, contributing interdisciplinary expertise to dental materials research. Dr. Arumugam has an extensive publication record with more than 60 research articles in high-impact international journals, focusing on the synthesis, characterization, and application of metal and metal-oxide nanocomposites, graphitic carbon nitride–based heterostructures, reduced graphene oxide hybrids, and green synthesized nanoparticles for photocatalytic degradation of organic pollutants, antibacterial activity, anticancer applications, and environmental remediation. His research emphasizes eco-friendly fabrication routes using plant extracts and biotemplates, solar-light-driven catalytic systems, and toxicity evaluation using zebrafish embryo and aquatic models to ensure environmental safety. He has also contributed to biomedical and dental material studies, including nanofibrous scaffolds and mineralization research, and authored a scholarly book chapter on environmental, health, and safety aspects of functionalized nanomaterials. Beyond publications, he is an active peer reviewer for numerous international journals across chemistry, materials science, nanotechnology, and environmental engineering, reflecting his strong standing in the research community. Through his teaching, cross-disciplinary collaborations, and sustained research productivity, Priyadharsan Arumugam has established himself as a significant contributor to sustainable nanoscience and advanced photocatalytic technologies.

Profiles: Scopus | ORCID

Featured Publications

Arumugam, P., Kamaraj, C., Sivakumar, S., Ragavendran, C., Vimal, S., & Al-Dhabi, N. A. (2023). Traditionally used medicinal plants mediate the biosynthesis of silver nanoparticles: Methodological, larvicidal, and ecotoxicological approach. Science of the Total Environment, 857, 162402.

Arumugam, P., Ragavendran, C., Kamaraj, C., Kadaikunnan, S., Raja, R. K., & Thiruvengadam, M. (2023). Evolvulus alsinoides-wrapped palladium nanoparticles: A potential photocatalyst for rhodamine blue degradation, inactivation of human pathogens and non-toxicity assessments on Daphnia magna and Danio rerio. Journal of Environmental Chemical Engineering, 11(4), 110541.

Arumugam, P., Malathy, A., Handayani, M., Hasan, I., Sivaranjani, K., & Sivakumar, S. (2024). Boosted solar-driven photocatalysis: Silver molybdate/reduced graphene oxide nanocomposites for methylene blue decomposition. Ionics, 30, 1–13.

Arumugam, P., Krishnasamy, M., Jayanthi, T. S., Choudhary, S., Rojviroon, T., & Rajendran, R. (2024). Engineered g-C3N4/MnO2 nanocomposite for exceptional photocatalytic methylene blue degradation and robust antibacterial impact. Journal of Cluster Science, 35, 1–15.

Arumugam, P., & Kamaraj, C. (2024). Emerging role of natural product-derived phytochemicals in the green synthesis of metal nanoparticles: A paradigm shift in sustainable nanotechnology. Natural Product Research, 38(22), 1–14.

Priyadharsan Arumugam’s research advances sustainable nanotechnology through green synthesis of high-performance nanomaterials for environmental remediation and biomedical applications. His work directly supports clean water technologies, eco-friendly industrial processes, and safer antimicrobial solutions, contributing to global goals in sustainability and public health innovation.

Mohsen Saboktakin Rizi | Materials Science | Best Researcher Award

Dr. Mohsen Saboktakin Rizi | Materials Science | Best Researcher Award

Assistant Professor at Karadeniz Technical University, Turkey

Dr. Mohsen Saboktakin Rizi is an accomplished researcher in materials science and engineering with expertise in additive manufacturing, thermomechanical processing, high entropy alloys, ceramics, and corrosion behavior. He earned his Ph.D. in Materials Science and Engineering from Chungnam National University, South Korea, and has since held postdoctoral positions in South Korea and Brazil, reflecting his strong global research collaborations. His scholarly output includes numerous publications in high-impact journals such as Journal of Alloys and Compounds, Materials Science and Engineering A, and Intermetallics, along with presentations at international conferences. He has also contributed to industrial projects in steel, copper, and mining industries, demonstrating the practical application of his research. Recognized with awards for research excellence, Dr. Rizi actively serves as a reviewer for leading journals and continues to advance innovation in materials engineering worldwide.

Professional profile

Google Scholar | Orcid Profile | Scopus Profile

Education

Dr. Mohsen Saboktakin Rizi has pursued an impressive academic journey in materials science and engineering. He obtained his Bachelor’s and Master’s degrees in Materials Engineering from Azad University, Najafabad, Iran, where he developed a solid foundation in metallurgy, mechanical properties, and advanced alloy systems. He further enhanced his expertise by completing a Ph.D. in Materials Science and Engineering at Chungnam National University, South Korea, focusing on hierarchical microstructure design to improve the strength–ductility balance of high entropy alloys. Following his doctorate, he has undertaken postdoctoral research positions at Kongju National University in South Korea and the Federal University of São Carlos in Brazil, broadening his international exposure and research collaborations. His educational background demonstrates both depth and diversity, positioning him as a strong contributor to advanced materials innovation.

Experience

Dr. Rizi has accumulated extensive professional experience in academia, research, and industry. His postdoctoral roles at Kongju National University and the Federal University of São Carlos have involved advanced experimental research in materials engineering, high entropy alloys, and additive manufacturing. He has also contributed to industrial projects with major companies in Iran, including Esfahan Steel, Mobarakeh Steel, and the National Iranian Copper Industries, where he applied his expertise in alloy design, composite development, and process optimization. Additionally, he has provided academic services as a reviewer for leading international journals, helping maintain the quality of scholarly publishing. He has teaching experience in subjects such as welding metallurgy, mechanical properties of materials, and corrosion protection. Through his combined academic and industrial experience, he bridges fundamental research with practical applications, advancing both scientific knowledge and technological solutions.

Research Interest

Dr. Rizi’s research interests lie in the field of advanced materials design, processing, and performance enhancement. His primary focus is on additive manufacturing, thermomechanical processing, and deformation mechanisms that drive the development of stronger, more durable, and lightweight materials. He has made significant contributions to understanding and engineering high entropy alloys, TWIP-TRIP steels, high entropy ceramics, and nanostructured materials with enhanced mechanical, thermal, and corrosion-resistant properties. His work emphasizes the relationships between microstructure and material performance, with a goal to tailor alloys for diverse industrial applications ranging from aerospace to energy. He also explores powder metallurgy, spark plasma sintering, and advanced surface engineering methods to create innovative solutions. By combining experimental work with industrial applications, his research aims to address critical challenges in modern materials science and engineering.

Awards and Honors

Dr. Rizi has received recognition for his outstanding academic and research achievements. Notably, he was honored with the Graduate School Dean’s Award from Chungnam National University in South Korea, acknowledging his academic excellence, impactful research, and contributions to the scientific community during his doctoral studies. Additionally, he was awarded the Iranian Young Researchers Award by the International Research Institute for Science and High Technology, highlighting his early promise and significant potential as a materials scientist. These recognitions underscore not only his dedication to advancing materials research but also his ability to inspire and contribute to scientific communities across different countries. His achievements demonstrate the respect he has earned among peers and mentors, further strengthening his credibility as a future leader in advanced materials research and innovation.

Research Skill

Dr. Rizi possesses a comprehensive skill set in experimental, analytical, and computational techniques essential for advanced materials research. He is proficient in the use of Transmission Electron Microscopy, Scanning Electron Microscopy, and Electron Backscatter Diffraction for microstructural characterization, alongside expertise in X-ray diffraction and Rietveld quantitative phase analysis. His skills extend to spark plasma sintering, alloy casting, and powder production methods, including gas and water atomization. He is adept at using specialized software such as MAUD, MTEX, and OIM for data interpretation, as well as Matlab for advanced analysis. With hands-on experience in corrosion testing, mechanical property evaluation, and metallographic analysis, his capabilities cover a broad spectrum of materials engineering. His skills allow him to conduct high-level research that integrates microstructural studies with practical performance evaluation.

Publication Top Notes

Title: Hierarchically activated deformation mechanisms to form ultra-fine grain microstructure in carbon containing FeMnCoCr twinning induced plasticity high entropy alloy
Authors: MS Rizi, H Minouei, BJ Lee, H Pouraliakbar, MR Toroghinejad, SI Hong
Year: 2021
Citation: Materials Science and Engineering: A 824, 141803 (128 citations)

Title: Effects of carbon and molybdenum on the nanostructural evolution and strength/ductility trade-off in Fe40Mn40Co10Cr10 high-entropy alloys
Authors: MS Rizi, H Minouei, BJ Lee, MR Toroghinejad, SI Hong
Year: 2022
Citation: Journal of Alloys and Compounds 911, 165108 (85 citations)

Title: Microstructure evolution and mechanical properties of (CoCrNi)90(AlTiZr)5(CuFeMo)5 multicomponent alloy: A pathway through multicomponent alloys toward new superalloys
Authors: H Pouraliakbar, SH Shim, YK Kim, MS Rizi, H Noh, SI Hong
Year: 2021
Citation: Journal of Alloys and Compounds 860, 158412 (78 citations)

Title: Strengthening and deformation behavior of as-cast CoCrCu1.5MnNi high entropy alloy with micro-/nanoscale precipitation
Authors: SH Shim, H Pouraliakbar, BJ Lee, YK Kim, MS Rizi, SI Hong
Year: 2022
Citation: Materials Science and Engineering: A 853, 143729 (62 citations)

Title: Effect of thermal tempering on microstructure and mechanical properties of Mg-AZ31/Al-6061 diffusion bonding
Authors: M Jafarian, MS Rizi, M Jafarian, M Honarmand, HR Javadinejad, …
Year: 2016
Citation: Materials Science and Engineering: A 666, 372-379 (59 citations)

Title: Characterization of the microscale/nanoscale hierarchical microstructure of an as-cast CrMnFeNiCu high-entropy alloy with promising mechanical properties
Authors: SH Shim, H Pouraliakbar, H Minouei, MS Rizi, SI Hong
Year: 2023
Citation: Journal of Alloys and Compounds (57 citations)

Title: Formation mechanism of high-entropy spinel thin film and its mechanical and magnetic properties: Linking high-entropy alloy to high-entropy ceramic
Authors: H Minouei, M Kheradmandfard, MS Rizi, M Jalaly, DE Kim, SI Hong
Year: 2022
Citation: Applied Surface Science 576, 151719 (50 citations)

Title: Effects of molybdenum on hot deformation behavior and microstructural evolution of Fe40Mn40Co10Cr10C0.5 high entropy alloys
Authors: M Ebrahimian, MS Rizi, SI Hong, JH Kim
Year: 2023
Citation: Science and Technology of Advanced Materials 24(1), 2186119 (32 citations)

Title: Rapid microwave-assisted synthesis and magnetic properties of high-entropy spinel (Cr0.2Mn0.2Fe0.2Co0.2-xNi0.2Znx)3O4 nanoparticles
Authors: H Minouei, M Jalaly, M Kheradmandfard, MS Rizi, DE Kim, SI Hong
Year: 2023
Citation: Ceramics International 49(8), 11885-11892 (26 citations)

Title: Data supporting the hierarchically activated deformation mechanisms to form ultra-fine grain microstructure in carbon containing FeMnCoCr twinning induced plasticity high entropy alloy
Authors: MS Rizi, H Minouei, BJ Lee, H Pouraliakbar, MR Toroghinejad, SI Hong
Year: 2022
Citation: Data in Brief 42, 108052 (24 citations)

Title: Enhancing mechanical properties in Ti-Containing FeMn40Co10Cr10C0.5 High-Entropy alloy through Chi (χ) phase dissolution and precipitation hardening
Authors: MS Rizi, M Ebrahimian, H Minouei, SH Shim, H Pouraliakbar, V Fallah, …
Year: 2024
Citation: Materials Letters 377, 137516 (21 citations)

Title: The investigation on metallurgical properties of roll bonding titanium clad steel
Authors: M Saboktakin, GR Razavi, H Monajati
Year: 2011
Citation: International Journal of Applied Physics and Mathematics 1(3), 177 (21 citations)

Title: Effect of Mo addition on the properties of high-Mn steel
Authors: GR Razavi, MS Rizi, HM Zadeh
Year: 2013
Citation: Materials and Technology, 611-614 (20 citations)

Title: Thermal stability of nano-hydroxyapatite synthesized via mechanochemical treatment
Authors: HR Javadinejad, M Saboktakin Rizi, E Aghababaei Mobarakeh, …
Year: 2017
Citation: Arabian Journal for Science and Engineering 42(10), 4401-4408 (18 citations)

Title: Effect of intermetallic compounds on microstructure and mechanical properties of hot roll bonding titanium to steel
Authors: M Saboktakin Rizi, HR Javadinejad, E Aghababaei, M Ebrahimian
Year: 2018
Citation: Transactions of the Indian Institute of Metals 71(8), 1941-1950 (17 citations)

Title: Effect of residual nanocrystals on thermal stability and mechanical properties of metalloid-containing amorphous alloys
Authors: H Minouei, MS Rizi, GH Akbari, SI Hong
Year: 2021
Citation: Materials Characterization 173, 110914 (16 citations)

Conclusion

Dr. Mohsen Saboktakin Rizi stands as a highly capable and innovative researcher whose contributions to materials science have both academic and industrial impact. His strong educational background, international research experiences, and deep expertise in advanced materials place him among the emerging leaders in the field. With extensive publications, conference contributions, and successful industrial collaborations, he demonstrates a rare ability to bridge theory with application. His awards highlight his excellence and potential, while his skills in advanced microscopy, alloy development, and additive manufacturing establish him as a versatile scientist. Dr. Rizi’s commitment to research, teaching, and community service as a journal reviewer shows his dedication to advancing knowledge and supporting scientific growth. He is poised to continue making influential contributions to materials engineering and global scientific progress.