Mohammed Jaboob | Management and Accounting | Best Researcher Award

Published on by Best Paper Awards

Dr. Mohammed Jaboob, Dhofar University, Oman: Management and Accounting, Best Researcher Award

Summary:

Mohammed Said Mahad Jaboob holds a Master’s degree in Management from Dhofar University and completed his Ph.D. in Philosophy of Education with a focus on Leadership and Management from IIUM, Malaysia, in 2022. With a commitment to enhancing the quality of skills and contributing to Omani education, Mohammed has held key roles at Dhofar University, serving as the Deputy Director of the Vice Chancellor’s office and the Vice Chancellor’s office coordinator. He brings extensive experience in leadership, management, and strategic planning, aiming to support organizational growth and development. Additionally, Mohammed has been actively involved in various committees, demonstrating his dedication to community engagement and academic initiatives. His research interests include topics such as augmented reality, virtual reality, job satisfaction, organizational culture, and the strategic value discipline in fresh graduates. Mohammed Said Mahad Jaboob is recognized for his contributions to the field of management and accounting.

Professional Profile:

Education & Qualification:

  • 2017: Master’s degree in Management from the College of Commerce and Business Administration, Dhofar University (Average: 2.7).
  • PhD in Philosophy of Education (Leadership and Management) from IIUM, Malaysia (2022).

Objectives:

With a master’s degree in Management from the College of Commerce and Business Administration at Dhofar University and a recent completion of a Ph.D. in the Philosophy of Education with a focus on Leadership and Management from IIUM-Malaysia in 2022, Mohammed Said Mahad Jaboob is well-equipped with a strong educational background. His employment history reflects his commitment to academic institutions, having served as the Deputy Director of the Vice Chancellor’s office at Dhofar University since July 2017. Additionally, he worked as the Vice Chancellor’s office coordinator from February 2015 to July 2017. With these experiences, Mohammed brings a wealth of knowledge and expertise to contribute to Omani education. His objectives include seeking new challenges to enhance personal abilities, elevating the quality of skills, integrating academic and educational experiences to enhance institutional capacity, and actively supporting strategic planning and growth for his organization, community, and country. Mohammed aspires to make meaningful contributions to Omani education both scientifically and cognitively.

Employment History:

In his distinguished employment history, Mohammed Said Mahad Jaboob has made significant contributions to Dhofar University, showcasing his commitment and leadership skills. Since July 2017, he has served as the Deputy Director of the Vice Chancellor’s office, demonstrating his ability to navigate and excel in administrative roles. Prior to that, from February 2015 to July 2017, Mohammed held the position of Vice Chancellor’s office coordinator, showcasing his continuity and dedication to the institution. Before his tenure at Dhofar University, he gained valuable experience as a marketing officer at Sun Line, an advertising and media company, from July 2011 to December 201. Through these roles, Mohammed has exhibited a diverse skill set and a strong commitment to both educational and corporate environments.

Membership:

Mohammed Said Mahad Jaboob’s active involvement in various committees reflects his commitment to service and leadership. Currently serving as the Vice Chairman of the Services Committee at the Chamber of Commerce and Industry in Dhofar Governorate Branch, he has been contributing to the business community’s development from January 2018 to December 2022. Within Dhofar University, Mohammed has held membership roles in critical committees, including the contract and purchasing committee since 2017, the developing policy and regulations committee from 2019 to 2021, and the Tenders committee since 2017. Additionally, his continuous participation in the Dhofar University Graduation ceremony committee since 2016 showcases his dedication to the academic community. Through these memberships, Mohammed actively contributes to policy development, regulations, and the overall growth of the institutions he serves.

Training:

Mohammed Said Mahad Jaboob has actively pursued professional development through various training programs, enhancing his skills and knowledge across different domains. Notable among these is a 30-hour training course on “Teaching and Learning Modern Teaching Methods and Educational Technology for Practicing Academic Work” at the University of Jordan’s Center of Consultations and Training, conducted from May 3 to May 7, 2023. Additionally, he participated in a “Scopus Training” by the Researcher Academy on Campus at Dhofar University on November 9, 2022, presented by Wael Mansour, a Senior Consultant.

Further, Mohammed obtained a certificate for attending the “KAIZEN” training program, focused on continuous improvement, conducted in collaboration with The Japanese Center for Competitiveness and Innovation from August 26 to 27, 2019. Additionally, he completed a training program on “Leadership and Organizational Communication” from August 14 to August 18, 2022, at the Centre for Training & Development of Human Resources at Dhofar University. His commitment to continuous learning is evident from his enrollment in a training program in administration affairs at Dhofar Municipality from July 2010 to September 2010. These diverse training experiences showcase his dedication to professional growth and the acquisition of valuable skills.

Publication Top Noted:

Mohammed Said Mahad Jaboob has contributed to various research papers. Here are some of his publications:

“Analyzing augmented reality (AR) and virtual reality (VR) recent development in education”

  • Authors: AM Al-Ansi, M Jaboob, A Garad, A Al-Ansi Journal: Social Sciences & Humanities Open Volume: 8, Issue: 1 Year: 2023 Pages: 100532

“Examining the mediating role of job satisfaction between motivation, organizational culture, and employee performance in higher education: A case study in the Arab region“

  • Authors: AM Al-Ansi, M Jaboob, A Awain Journal: Educ Sci. Manag Volume: 1, Issue: 1 Year: 2023 Pages: 30-42

“Knowledge of strategic value discipline and its importance for fresh graduate: A qualitative investigation“

  • Authors: ASM Jaboob, MS Jaboob, TS Al Amri Year: 2021

“Understanding how big data awareness affects healthcare institution performance in Oman“

  • Authors: S Hammami, O Durrah, L El-Maghraby, M Jaboob, S Kasim, K Baalwi Year: 2024

“Evaluation of Dhofar University Performance according to Quality Assurance and Academic Accreditation Criteria of Islamic Universities Federation“

  • Authors: M Jaboob, D Al Hadabi, M Al Ani Journal: Global Journal of Economics & Business Volume: 13, Issue: 4 Year: 2023

 

Abdus Salam | Educational Psychology | Best Researcher Award

Published on by Best Paper Awards

Dr. Abdus Salam, West Goalpara College, India: Educational Psychology, Best Researcher Award

Summary:

👨‍🎓 Dr. Abdus Salam is a highly educated professional with a diverse academic background. He earned his B.A. from Gauhati University in Guwahati, Assam, India, and went on to complete his M.A. at Kurukshetra University in Haryana, India. Dr. Salam furthered his academic journey with an M.Phil. from Vinayaka Missions University in Salem, Tamil Nadu, and obtained his Ph.D. from Singhania University in Pacheri Bari, Jhunjhunu, Rajasthan.

🏫 Dr. Salam has actively participated in various workshops covering topics such as Quality Enhancement, Reaccreditation, Research Methodology, and the Preparation of Proposals. His commitment to education is evident in his engagement with the “Empowerment of Schools through Digitization with Reference to NEP-2020” and “The Foundations of College Mathematics.”

Professional Profile:

Education:

Dr. Abdus Salam has pursued a distinguished academic journey, attaining qualifications from various esteemed institutions:

  • B.A.: Gauhati University, Guwahati, Assam, India
  • M.A.: Kurukshetra University, Haryana, India
  • M.Phil.: Vinayaka Missions University, Salem, Tamil Nadu
  • Ph.D.: Singhania University, Pacheri Bari, Jhunjhunu, Rajasthan

This academic trajectory reflects a diverse and comprehensive educational background, spanning different regions of India and encompassing various fields of study.

International Conferences & Symposiums :

Dr. Abdus Salam has actively contributed to various international conferences and symposiums, showcasing his expertise in diverse fields:

Arabic and Islamic Studies in North East India: Dr. Salam delved into the intricate realms of Arabic and Islamic studies in the specific context of North East India. His contributions likely shed light on the unique challenges and opportunities present in this region.

Community-Based Peacebuilding: Challenges and Opportunities: Acknowledging the significance of community-based approaches, Dr. Salam participated in discussions surrounding peacebuilding. His insights likely revolved around the challenges and opportunities inherent in fostering peace at the grassroots level.

Quality Education for Children and Students in Africa: Challenges and Opportunities: Dr. Salam engaged in conversations aimed at improving the quality of education for children and students in Africa. This likely involved exploring challenges and identifying opportunities for enhancing educational outcomes on the continent.

Technology and Law in Cybersecurity: Contemporary Challenges and Solutions: With an understanding of the evolving landscape of technology and law, Dr. Salam likely addressed contemporary challenges and proposed solutions in the realm of cybersecurity. His contributions might have spanned legal and technological dimensions.

Indian and Global Opportunities in the Sciences and Humanities: A Critical Discourse: Dr. Salam actively participated in critical discussions concerning opportunities in both the sciences and humanities, emphasizing a global perspective. His insights likely covered the interdisciplinary nature of these opportunities.

Mobile Technologies: Use of Mobile Devices in Library: Recognizing the transformative role of mobile technologies, Dr. Salam likely discussed their effective utilization in library settings. His contributions might have touched upon leveraging mobile devices to enhance accessibility and information retrieval.

These engagements underscore Dr. Abdus Salam’s broad interests and his commitment to addressing challenges while exploring opportunities in various academic and societal domains on an international scale.

Workshops:

Dr. Abdus Salam has actively participated in a diverse range of workshops, showcasing his commitment to professional development and educational advancement:

Quality Enhancement, Reaccreditation, and The Role of Internal Quality Assurance Cell: Dr. Salam engaged in discussions and activities aimed at enhancing the quality of education, understanding the reaccreditation process, and exploring the vital role of Internal Quality Assurance Cells (IQAC) in educational institutions.

Research Methodology and Preparation of Proposal: Demonstrating a strong research orientation, Dr. Salam participated in workshops focused on research methodology. This involved honing skills in designing and preparing research proposals.

Diploma in Elementary Education: Dr. Salam expanded his expertise in education by undertaking a Diploma in Elementary Education. This reflects his commitment to foundational aspects of teaching and learning.

Empowerment of Schools through Digitization with Reference to NEP-2020: Acknowledging the transformative impact of digitization, Dr. Salam explored ways to empower schools through technology, with a specific reference to the National Education Policy of 2020.

The Foundations of College Mathematics: Dr. Salam likely delved into the fundamental principles of college mathematics, ensuring a solid foundation for educational practices in this crucial subject.

Internationalization of Your Institute – The Roadmap: Understanding the importance of global perspectives in education, Dr. Salam participated in discussions on internationalizing educational institutes and developing a roadmap for the same.

Effective Teaching-Learning Practices: Dr. Salam actively contributed to workshops focused on effective teaching and learning strategies, aiming to enhance the overall educational experience.

Role of IQAC in an Educational Institution and Best Practices: Building on his expertise in quality assurance, Dr. Salam likely explored the best practices associated with the role of IQAC in educational institutions.

Advance Teaching, Learning, Research Methodology, and Innovations: Dr. Salam broadened his horizons in education by participating in workshops that advanced teaching methodologies, learning strategies, and innovations in research.

International Yoga Day: Dr. Salam celebrated International Yoga Day, showcasing a holistic approach to education that includes the promotion of physical and mental well-being.

Intellectual Property Right (IPR): Dr. Salam delved into the realm of Intellectual Property Rights, gaining insights into the protection and management of intellectual creations.

Benefits of Cognitive Habits for Neurodiverse Students: Dr. Salam likely explored the benefits of cognitive habits for students with neurodiverse conditions, emphasizing inclusive and supportive educational practices.

These workshops collectively highlight Dr. Abdus Salam’s commitment to continuous learning, quality enhancement in education, and the implementation of innovative and inclusive practices in the academic sphere.

Research Focus :

Dr. Abdus Salam, a Pakistani theoretical physicist, made significant contributions to the field of theoretical physics. His primary research focus and notable contributions include:

  • Electroweak Unification
  • Electroweak Symmetry Breaking
  • Quantum Field Theory
  • Grand Unified Theories (GUTs)
  • Contributions to Theoretical Particle Physics

It’s important to note that Dr. Abdus Salam was a co-recipient of the Nobel Prize in Physics in 1979, along with Sheldon Glashow and Steven Weinberg, for their contributions to the electroweak unification. His dedication to advancing theoretical physics has left a lasting impact on the field.

Publication Top Noted:

Dr. Abdus Salam has been actively contributing to multidisciplinary studies and scholarly publications. Here are some of his recent works:

“WOMEN EMPOWERMENT- More Needs of the Hour”

  • Published on: 2023-02-09
  • Type: Book
  • Publisher: Lulu.com

“RECENT TRENDS OF MULTIDISCIPLINARY STUDIES IN INDIA”

  • Published on: 2022-10-15
  • Type: Book
  • Publisher: Lulu.com

“An Analytical Study among Collegiate Students with Relation to Youth Problems in Goalpara District of Assam”

  • Published in: International Journal of Reviews and Research in Social Sciences
  • Published on: 2022-06-19
  • Type: Journal Article
  • ISSN: 2347-5145 (Print), 2454-2687 (Online)

“FOUNDATIONS OF MULTIDISCIPLINARY STUDIES EMBRACED TWENTY-FIRST CENTURY”

  • Published on: 2022-04-25
  • Type: Book
  • Publisher: Lulu.com

“Impact of School and Home Environment on Scientific Creativity of Primary School Level Students”

  • Published in: International Journal of Research and Analytical Reviews
  • Published on: 2021-10-04
  • Type: Journal Article
  • ISSN: E-ISSN 2348-1269, P-ISSN 2349-5138

These works showcase Dr. Abdus Salam’s diverse research interests, covering topics such as women empowerment, multidisciplinary studies in India, youth problems, and the impact of environments on scientific creativity.

 

 

Mario Diaz Matus de la Parra | Animal production | Best Researcher Award

Published on by Best Paper Awards

Mr. Mario Diaz Matus de la Parra, Austral University of Chile, Chile: Animal production, Best Researcher Award

Summary:

Mario Cristóbal Díaz Matus de la Parra is a highly qualified professional with a strong academic background in biotechnology. He earned his Biotenology degree from the University of La Frontera, Chile, in 2015, followed by a Master’s degree in Genetics from the Universidad Austral de Chile in 2022. Additionally, he holds a Licenciado en Biotecnología from the University of La Frontera, awarded in 2014.

Mario has contributed significantly to various research projects, showcasing his expertise as a Technical Staff member. His work spans projects related to genetic selection, fatty acid profiles in ruminant products, and the development of scientific-technological processes for premium charcuterie.

Professional Profile:

Academic backgrounds:

Biotenologist University of La Frontera, Chile Year: 2015

Master of Science with a mention in Genetics Austral University of Chile, Chile Year: 2022

Graduate in Biotechnology University of La Frontera, Chile Year 2014

Professional experience:

Technical Staff FIC Project 19-60 “GeneTAURUS: Selection of Superior Genotypes in Product Quality and Productive Efficiency” Year: 2021-2022

Technical Staff Fondecyt Project 11170460 “Does Hair’s Fatty Acids Predict Fatty Acid Profile on Ruminant Products?”
Year: 2017-2020

Technical Staff Fondecyt Project 11160687 “Fatty Acid Composition and Meat Quality Traits in Suffolk Down Breed Associated with Polymorphisms in FASN and SCD1 Genes”
Year: 2016-2019

Technical Personnel Project ARIII70005 “Scientific-Technological Development for the Production of Premium Delicatessen with Industrial Property in the Cecina Factories of La Araucanía”
Year: 2018-2019

Molecular Analyst Fondecyt Project 1171286 “Phytohormones and Its Association with Resistance Mechanisms to Al and Mn Toxicity in Highbush Blueberry Cultivars Growing in Acid Soil: A Strategy for Improving Yield and Fruit Quality of Plants”
Year: 2017-2020

Molecular Analyst in the Plant Tissue Culture Laboratory of the University of La Frontera
Year: 2015

Research Assistant Project DI13-0048 “Identification of Proteins Induced by Cold and Salinity in the Criofila Species Deschampsia Antarctica Desv., and their Correlation at the Transcriptome Level”
Year: 2013-2014

Undergraduate Teaching:

In 2018, He was a Participating Professor of APA-300 Genetics in the Agronomy and Biotechnology Major at the University of La Frontera. Additionally, in 2017, He played the role of Professor of Practice of Physiology ICQ-353 and Professor of Practice of Molecular Biology He ICQ-318 in the Biochemistry Major. Likewise, in 2015, He worked as a Molecular Biology Assistant ICQ-318 in the Biochemistry Major, and as a General Biology Assistant ARN-118 and a Plant Physiology Assistant ARN-268 in the Agronomy Major.

In 2014, He contributed as an RNA-334 Plant Tissue Culture Assistant in the Biotechnology Major, APA-380 Genetic Engineering Assistant in the Biotechnology and Civil Engineering Majors in Biotechnology, and APA-343 Molecular Biology Assistant in both majors. In 2013, He participated as an APA-343 Molecular Biology Assistant in the Biotechnology Major and an RNA-270 Plant Morphophysiology Assistant in the Biotechnology and Natural Resources Engineering Majors.

Improvements:

My constant quest for improvement included a Micropipette Course and Workshop in 2017, as well as participation in a Course on Preservation, Maintenance and Data Management of Strains of Microorganisms in Culture Collections in 2016. His also completed courses on Modeling for Prediction and Prevention of Mycotoxins in 2016, Design of CONICYT Projects and Instruments in 2016, and Polyphasic Identification of Microorganisms in 2016. Likewise, He acquired knowledge in Biosafety in Laboratories in 2015 and Basic Methods of Two-Dimensional Proteomics in 2013.

Conferences:

Analysis of the Population Structure and Genetic Bottleneck of Mapuche Chicken Populations in Southern Chile

Event: XIV International Symposium on Genetic Resources for the Americas and the Caribbean SIRGeAC
Date: December 13-15, 2023
Location: Valdivia, Chile
Wool Quality in F1 Sheep Resulting from the Crossing between the Austral and Suffolk Down Breeds in the Los Ríos Region

Event: XLVIII Congress of the Chilean Animal Production Society
Date: November 15-17, 2023
Location: Valdivia, Chile
Discriminant Analysis for the Identification of Fat Content in Sheep Milk from Wool Fatty Acids

Event: XLVIII Congress of the Chilean Animal Production Society
Date: November 15-17, 2023
Location: Valdivia, Chile
Diversity and Genetic Structure of the Mapuche Chicken in the La Araucanía Region

Event: XLVII Chilean Animal Production Society Congress
Date: November 29 to December 1, 2022
Location: Coyhaique, Chile
Correlation between the Fatty Acid Composition of Wool and the Milk Composition of Suffolk Down Sheep

Event: XLIV Congress Chilean Animal Production Society
Date: November 6-8, 2019
Location: Chillan, Chile
Other events:
Cold-regulated Proteins in the Extremophile Hair Grass Deschampsia Antarctica Desv.

Event: VIII Plant Biology Meeting
Date: December 2-5, 2013
Location: Pucón, Chile
Physiological and Productive Responses Mediated by Nitrogen Availability in Colobanthus Quitensis and Deschampsia Antarctica Evaluated in Glasshouse

Event: VIII Plant Biology Meeting
Date: December 2-5, 2013
Location: Pucón, Chile
Expression Analysis through qPCR of G3PD, FTSH and SOD in Deschampsia Antarctica Desv.

Event: 4th International Workshop Advances in Science and Technology of Bioresources
Date: December 4-6, 2013
Location: Pucón, Chile
Visualization of Heterogeneous Photochemical Efficiency of Photosystem II in Colobanthus Quitensis Using Imaging Fluorescence

Event: 4th International Workshop Advances in Science and Technology of Bioresources
Date: December 4-6, 2013
Location: Pucón, Chile

Research Focus:

Mario Cristóbal Díaz Matus de la Parra’s specific research focus is not explicitly mentioned in the provided information. However, based on his academic background in biotechnology and genetics, as well as his involvement in projects related to fatty acids, meat quality traits, and molecular analysis of plant responses to environmental factors, it can be inferred that his research interests may include areas such as:

  • Genetics and Genomics
  • Functional Genomics
  • Molecular Biology
  • Biotechnological Applications

Publication Top Noted:

Title: “Utilization of Wool Integral Lipids to Determine Milk Fat Content in Suffolk Down Ewes“

  • Authors: K Inostroza, G Larama, S Bravo, M Díaz-Matus de la Parra, N Sepúlveda
  • Journal: Applied Sciences
  • Volume: 12
  • Issue: 3
  • Year: 2022
  • Pages: 1046

Title: “Characterization of the genetic diversity, structure and admixture of seven Chilean chicken breeds“

  • Authors: M Díaz-Matus de la Parra, K Inostroza, JA Alcalde, G Larama, S Bravo
  • Journal: Poultry Science
  • Year: 2023
  • DOI: 103238

 

 

Flavio De Barbieri | Mechanical Behavior of Materials | Best Researcher Award

Published on by Best Paper Awards
Prof Dr. Flavio De Barbieri, Universidad Tecnica Federico Santa Maria, Chile: Mechanical Behavior of Materials, Best Researcher Award

Summary:

Dr. Flavio De Barbieri is a seasoned professional with a diverse background in engineering, materials science, and leadership. He holds a Ph.D. in Engineering Sciences with a specialization in Materials Science from the University of Santiago de Chile. Dr. De Barbieri has played pivotal roles in the Chilean Navy, serving as the Manager of Systems Analysis and the Manager of Research and Development. His international experience includes overseeing technical inspection at Airbus Military in Seville, Spain.

Professional Profile:

🎓 Education:

  • Ph.D. in Engineering Sciences, Materials Science Specialization, University of Santiago de Chile, 2011-2014.
  • Postgraduate Degree in Corrosion, Pontifical Catholic University of Valparaíso, 2003-2004.
  • Postgraduate in Structural Numerical Analysis using Finite Element Method (FEM), ESSS Institute, ongoing since 2021.
  • Mechanical Naval Engineer, Naval Polytechnic Academy, 1995-2000.

Research Focus:

Dr. Flavio De Barbieri’s research focuses on several key areas within materials science and engineering. Some of the primary areas of his research include:

Crack Growth in Manganese Steels (TWIP): Dr. De Barbieri directs a Fondecyt Grant exploring the crack growth law in Manganese Steels, particularly those with Twinning-Induced Plasticity (TWIP). This research contributes to understanding the behavior of these steels under different conditions, with potential applications in various industries.

Wear Behavior of TWIP Steel: As a co-investigator in internal research projects, Dr. De Barbieri explores the wear behavior of TWIP steel, employing Discrete Element Method (DEM) simulations. This research contributes to the knowledge of how these steels respond to mechanical wear and environmental factors.

Seismicity and Thermal Energy Applications: Another area of his research involves being a co-investigator in projects related to induced seismicity and thermal energy. This research likely explores the connection between human activities, such as geothermal energy extraction, and seismic events.

Fracture Mechanics in TWIP Steels: As a co-investigator of a Fondecyt Grant, Dr. De Barbieri has been involved in research related to fracture mechanics in TWIP steels. This research likely delves into understanding how these steels behave under conditions that may lead to fracture, providing valuable insights for structural applications.

Influence of Environment on Durability of Concrete: Dr. De Barbieri has been part of a CYTED Project related to the influence of the environment on the durability of concrete. This research could involve studying the effects of environmental factors on concrete structures, contributing to the development of more resilient construction materials.

Overall, Dr. Flavio De Barbieri’s research portfolio showcases a multidisciplinary approach, combining materials science, structural mechanics, and environmental considerations. His work contributes to both fundamental understanding and practical applications in various engineering fields.

Professional Experience:

In addition to his remarkable professional journey, Dr. De Barbieri has made substantial contributions to academia. As an Associate Professor at the University of Santiago de Chile and an Assistant Professor at the Technical University Federico Santa María, he has imparted knowledge in Metallurgical Engineering and Materials Science. His dedication to education is further evident in his role as an Academic at the Naval Polytechnic Academy, where he taught various engineering subjects.

Academic Experience:

Dr. De Barbieri’s commitment to advancing engineering education led to his appointment as the Academic Director of engineering programs at the Technical University Federico Santa María in 2022. Currently, he serves as the Head of the Metallurgical Civil Engineering Program, fostering academic excellence and program development.

Research Experience:

In the realm of research, Dr. De Barbieri has demonstrated leadership as the Research Director for a Fondecyt Grant focused on the crack growth law in Manganese Steels. He has also contributed as a Co-Investigator in diverse research projects addressing wear behavior, seismicity, and fracture mechanics.

Creation or Invention:

His inventive spirit is showcased through his role as the Principal Developer of a Test Bench for Pratt & Whitney aeronautical turbine engines, as well as the development of a portable power generation kit for ground forces, reflecting his commitment to practical innovation.

Awards and Distinctions:

Dr. De Barbieri’s academic achievements include being recognized as the Best Graduate of the Corrosion Postgraduate Program in 2004 at the Pontifical Catholic University of Valparaíso. He was also honored by the Naval Aviation Command for achieving the highest academic performance in the Naval Engineers course in 2002.

Publication Top Noted:

“Temperature dependence of the microstructure and mechanical properties of a twinning-induced plasticity steel”

  • Published in Metals in 2018.
  • Investigates the impact of temperature on the microstructure and mechanical properties of a twinning-induced plasticity (TWIP) steel.
  • Provides insights into how variations in temperature influence the behavior of TWIP steels, crucial for applications in different environments.

“Corrosion evaluation by electrochemical real-time tracking of VM12 martensitic steel in a ternary molten salt mixture with lithium nitrates for CSP plants”

  • Published in Solar Energy Materials and Solar Cells in 2021.
  • Focuses on the real-time electrochemical tracking of VM12 martensitic steel corrosion in a complex molten salt mixture relevant to Concentrated Solar Power (CSP) plants.
  • Offers valuable insights into the corrosion behavior of materials used in renewable energy applications.

“Mechanical and microstructural characterization of an aluminum bearing trip steel”

  • Published in Metallurgical and Materials Transactions A in 2016.
  • Presents a comprehensive study on the mechanical and microstructural properties of an aluminum-bearing Transformation-Induced Plasticity (TRIP) steel.
  • Contributes to understanding the behavior of TRIP steels, which are important for lightweight and high-strength applications.

“Mechanical behavior of a twip steel (Twinning Induced Plasticity)”

  • Published in Matéria (Rio de Janeiro) in 2015.
  • Investigates the mechanical behavior of a TWIP steel, focusing on the phenomenon of twinning-induced plasticity.
  • Provides valuable insights into the deformation mechanisms of TWIP steels, crucial for their application in structural engineering.

“Frictional energy patterns related to the temperature increases due to intraplate seismicity, southern Norway, 2000–2019 catalogue”

  • Published in the Norwegian Journal of Geology in 2021.
  • Explores frictional energy patterns associated with temperature increases due to intraplate seismicity in southern Norway over the period 2000–2019.
  • Offers insights into the geological and geophysical aspects of intraplate seismic events.

 

 

Tarek Ganat | Petroleum Engineering | Most Cited Article Award

Published on by Best Paper Awards
Assoc Prof Dr. Tarek Ganat, Sultan Qaboos University, Oman: Petroleum Engineering, Most Cited Article Award

Summary:

Tarek Ganat is an accomplished professional with over 25 years of experience in the oil and gas industry and academia. His expertise spans production and reservoir engineering, with a focus on reservoir development planning, simulation, forecasting, and enhanced oil recovery (EOR) studies.

Application of supervised machine learning paradigms in the prediction of petroleum reservoir properties: Comparative analysis of ANN and SVM models

Objective:

  • Prediction of petroleum reservoir properties using supervised machine learning.
  • Comparative analysis of Artificial Neural Networks (ANN) and Support Vector Machines (SVM) models.

Authors:

  • DA Otchere
  • TOA Ganat
  • R Gholami
  • S Ridha

Journal:

  • Published in the Journal of Petroleum Science and Engineering.

Year:

  • The paper was published in the year 2021.

Citations:

  • The paper has received a substantial number of citations, indicating its impact and relevance in the research community.

Focus:

  • The primary focus is on the application of machine learning in predicting properties related to petroleum reservoirs.
  • Specifically, the study compares the performance of ANN and SVM models in this predictive task.

Significance:

  • The comparative analysis provides insights into the strengths and weaknesses of ANN and SVM models in the context of petroleum reservoir characterization.
  • The research contributes to advancements in reservoir engineering and the application of machine learning techniques in the petroleum industry.

Professional Profile:

🎓 Education:

  • PhD in Petroleum Engineering, IIUM-Kuala Lumpur, Malaysia (2016)
  • MSc Eng in Engineering Management, Tripoli University, Libya (2005)
  • MSc Eng in Petroleum Engineering, ISE University-Spain/Madrid (2003)
  • BSc in Petroleum Engineering, Tripoli University, Libya (1992)

Research Focus:

Reservoir Engineering:

  • Development of innovative reservoir engineering techniques.
  • Simulation modeling for reservoir management.

Enhanced Oil Recovery (EOR):

  • Studies and applications of enhanced oil recovery methods.
  • Investigating the impact of EOR on reservoir dynamics.

Fluid Flow and Multiphase Flow Measurements:

  • Analysis of fluid flow patterns in oil wells.
  • Reliability analysis of multiphase flow measurements.

Machine Learning Applications:

  • Developing machine learning-based models for surface wettability determination.
  • Integration of artificial intelligence in petroleum engineering.

Environmental Impact Studies:

  • Experimental studies evaluating the environmental impacts of produced water on ecosystems.

Rock Properties and Reservoir Engineering:

  • Fundamentals of reservoir rock properties.
  • Practical aspects of rock properties in reservoir engineering.

Teaching and Education in Petroleum Engineering:

  • Effective teaching methodologies in petroleum engineering.
  • Curriculum development for undergraduate and postgraduate programs.

Pressure Transient Analysis:

  • Modern approaches to pressure transient analysis in petroleum reservoirs.

📚 Teaching Experience:

University (Undergraduate and Postgraduate):

  • Reservoir Engineering
  • Applied Reservoir Engineering I & II
  • Production Technology I & II
  • Introduction to Fluid Mechanics
  • Pressure Transient
  • Enhanced Oil Recovery
  • Reservoir Rock and Fluid Properties

Training Centers:

  • Production Technology
  • Pressure Transient
  • PVT Fluid Analysis
  • Reserve Estimations
  • Scale Analysis

🌐 Key Competencies:

  • Over 25 years in oil & gas development planning, production forecasting, and reservoir management.
  • Specialist in reservoir development planning, simulation, monitoring, and reserves estimation.
  • Expertise in performance review and recovery improvement of major fields.
  • Leadership in multinational and multicultural joint ventures.
  • Strong mentoring skills and experience in advising new field acquisition and prospect evaluation.

👨‍💼 Employment History: Sultan Qaboos University, Muscat, Oman (September 2021 – Present)

  • Faculty member in Petroleum Engineering.
  • Subjects taught: Production Engineering, Advanced Production Engineering, Well Stimulation, Field Processing of Natural Gas.
  • Advising undergraduate and graduate students.
  • Actively engaged in research to contribute to the field.

📖 Professional Books:

Tarek Ganat, (2019). “Fundamentals of Reservoir Rock Properties” Published by Springer, ISBN: 9783030281397. Link. doi.org/10.1007/978-3-030-28140-3_1.

Tarek Ganat (2020). “Technical Guidance for Petroleum Exploration and Production Plans”, Published by Springer. DOI:10.1007/978-3-030-45250-6.

Tarek Ganat and Amr Badawi (2021). “Rock Properties Reservoir Engineering Practical View”, Published by Springer. DOI.org/10.1007/978-3-030-87462-9.

Tare Ganat (2023). “Modern Pressure Transient Analysis of Petroleum Reservoirs.” DOI:https://doi.org/10.1007/978-3-031-28889-0. Published by Springer Cham.

“Advancements in Chemical Enhanced Oil Recovery.” Tushar Sharma, Krishna Raghav, Tarek Ganat, Imtiaz Ali. ISBN: 9781774915080. Published by Elsevier, November, 2023.

Publication Top Noted:

Title: Application of supervised machine learning paradigms in the prediction of petroleum reservoir properties: Comparative analysis of ANN and SVM models

  • Authors: DA Otchere, TOA Ganat, R Gholami, S Ridha
  • Journal: Journal of Petroleum Science and Engineering
  • Year: 2021
  • Citations: 255

Title: Application of gradient boosting regression model for the evaluation of feature selection techniques in improving reservoir characterization predictions

  • Authors: DA Otchere, TOA Ganat, JO Ojero, BN Tackie-Otoo, MY Taki
  • Journal: Journal of Petroleum Science and Engineering
  • Year: 2022
  • Citations: 64

Title: Emerging applications of nanomaterials in chemical enhanced oil recovery: Progress and perspective

  • Authors: N Lashari, T Ganat
  • Journal: Chinese Journal of Chemical Engineering
  • Year: 2020
  • Citations: 61

Title: A novel custom ensemble learning model for an improved reservoir permeability and water saturation prediction

  • Authors: DA Otchere, TOA Ganat, R Gholami, M Lawal
  • Journal: Journal of Natural Gas Science and Engineering
  • Year: 2021
  • Citations: 42

Title: A perspective on the potential application of bio-inhibitors for shale stabilization during drilling and hydraulic fracturing processes

  • Authors: AK Quainoo, BM Negash, CB Bavoh, TO Ganat, BN Tackie-Otoo
  • Journal: Journal of Natural Gas Science and Engineering
  • Year: 2020
  • Citations: 42

Title: Chemical sand consolidation: From polymers to nanoparticles

  • Authors: FS Alakbari, ME Mohyaldinn, AS Muhsan, N Hasan, T Ganat
  • Journal: Polymers
  • Year: 2020
  • Citations: 37

Title: Recent advances in multifunctional proppant technology and increased well output with micro and nano proppants

  • Authors: DK Danso, BM Negash, TY Ahmed, N Yekeen, TAO Ganat
  • Journal: Journal of Petroleum Science and Engineering
  • Year: 2021
  • Citations: 34

Title: Fundamentals of reservoir rock properties

  • Author: TAAO Ganat
  • Publisher: Springer
  • Year: 2020
  • Citations: 29

 

 

Alfredo Rodriguez | Magnetic Resonance Imaging | Best Researcher Award

Published on by Best Paper Awards
Dr. Alfredo Rodriguez, Universidad Autonoma Metropolitana, Mexico: Magnetic Resonance Imaging, Best Researcher Award

Bio Summary:

Dr. Alfredo Rodriguez is a distinguished physicist and educator with a profound impact on the fields of Magnetic Resonance Imaging (MRI) and engineering. Holding a Philosopher Doctorate in Physics from the Sir Peter Mansfield Magnetic Resonance Centre at the University of Nottingham (1997) and a Bachelor’s degree in Engineering Physics from the Universidad Autónoma Metropolitana Atzcapotzalco (1989), Dr. Rodriguez boasts over 30 years of teaching experience at the Universidad Autónoma Metropolitana Iztapalapa.

🔬 His research contributions, documented in international journals, span innovative coil designs for rodent MRI, advanced waveguide imaging techniques, and investigations into the neural effects of thermal nociception. In addition to his academic prowess, Dr. Rodriguez has supervised numerous doctoral and master’s research projects, contributing significantly to the scientific community.

Professional Profile:

🎓 Education:

👨‍🎓 Dr. Alfredo Rodriguez is a distinguished physicist with a rich educational background:

🎓 Doctorado en Física (1997):

  • The University of Nottingham
  • University Park, Nottingham NG7 2RD, Inglaterra.

🎓 Licenciatura en Ingeniería Física (1989):

  • Universidad Autónoma Metropolitana Atzcapotzalco
  • Ave. San Pablo 180, CdMx. 02200, México.

Dr. Rodriguez’s academic journey showcases a commitment to excellence in both theoretical and applied aspects of physics, particularly in the realm of Magnetic Resonance Imaging. 🌌🔬

Research Focus:

Dr. Alfredo Rodriguez’s research primarily focuses on the interdisciplinary intersection of physics and biomedical engineering, with a specific emphasis on Magnetic Resonance Imaging (MRI). His notable research contributions include:

Coil Design for Rodent MRI: Dr. Rodriguez has investigated and developed novel coil designs for rodent MRI at high magnetic fields (7 Tesla). These designs, such as volume coils with slotted end-rings and double-crossed radiofrequency coils, aim to enhance the efficiency and uniformity of imaging for small animal studies.

Waveguide Imaging Techniques: His research extends to the exploration of external waveguide magnetic resonance imaging, particularly for lower limbs at 3 Tesla. This work involves the development and application of advanced imaging techniques using external waveguides.

Neural Effects of Thermal Nociception: Dr. Rodriguez has conducted studies tracking the temporal footprint effect of thermal nociception and denervation on the brain’s pain matrix. Using functional MRI (fMRI) and BOLD (Blood Oxygen Level Dependent) studies in rats, this research delves into understanding the neural responses to thermal stimuli and denervation.

Antenna Configurations for MRI: In the realm of engineering, he has directed research on innovative antenna configurations for MRI, specifically focusing on configurations for high magnetic fields (7 Tesla) and their application to imaging rodents.

Doctoral Research:

Jaime Fabián Vázquez de la Rosa (2014): Investigation on Remote Detection Magnetic Resonance Imaging using Waveguides.

Oscar Rene Marrufo Meléndez (2012): Innovative Antenna Configurations for Rodent MRI at 7 Tesla.

Sergio Enrique Solís Nájera (2010): Development of Multichannel Antennas for High Magnetic Field MRI.

Rafael Rojas Rodríguez (2010): Signal-to-Noise Ratio and Specific Absorbed Energy Ratio in MRI Studies.

Karelia Ocegueda Hernández (2007): Determination of Signal-to-Noise Ratio for a Magnetron-type Surface Antenna.

Master’s Research:

Susana Edith Hernández Arrazola (2012): Investigation of Nuclear Magnetic Resonance Relaxation Times and their Relationship with the Hydration Degree of Cement Pastes.

Rene Guadarrama Soria (2011): Modeling of Radiology Service for Assessing the State of Medical Technology and Infrastructure.

Dr. Rodriguez’s dedication to both teaching and mentoring research projects underscores his comprehensive contribution to academia and the advancement of knowledge in the field of physics and biomedical engineering. 🎓🔍🔬

Research Timeline:

1989: Graduated with a Bachelor’s degree in Engineering Physics from Universidad Autónoma Metropolitana Atzcapotzalco.

1997: Earned a Doctorate in Physics (Philosophical Doctorate) from the Sir Peter Mansfield Magnetic Resonance Centre, School of Physics and Astronomy, The University of Nottingham.

1999-2001: Served as a Candidate in the Sistema Nacional de Investigadores (SNI) in the area of Engineering.

1999: Became a member of the International Society for Magnetic Resonance in Medicine.

2002-2020: Achieved the status of Level I in the Sistema Nacional de Investigadores (SNI) in the field of Engineering.

1999-Present: Engaged in teaching activities at the Universidad Autónoma Metropolitana Iztapalapa, imparting courses in classical electromagnetic theory, algebra, calculus, scientific research, and medical imaging.

1999-Present: Involved in mentoring and directing research projects at the doctoral and master’s levels, covering topics such as remote detection magnetic resonance imaging, innovative antenna configurations, and the neural effects of thermal nociception.

Publication Top Noted:

📄 Dr. Alfredo Rodriguez has made significant contributions to the field of Magnetic Resonance Imaging (MRI), as evidenced by his publications in reputable international journals:

Title: A theoretical and experimental investigation on a volume coil with slotted end-rings for rat MRI at 7 T.

  • Authors: S. Solis-Najera, R. Ruiz, R. Martin, F. Vazquez, O. Marrufo, A. O. Rodriguez.
  • Journal: Magnetic Resonance Materials in Physics, Biology and Medicine, 2023.
  • DOI: 10.1007/s10334-023-01096-w.

Title: Double-crossed radiofrequency coil with improved uniformity for rodent MRI at 7 T.

  • Authors: O. Marrufo, F. Vazquez, R. Martin, A. O. Rodriguez, S. E. Solis-Najera.
  • Journal: Journal of Magnetic Resonance Open, 2022.
  • DOI: 10.1016/j.jmro.2022.100068.

Title: Tracking the Temporal Footprint Effect of Thermal Nociception and Denervation on the Brain’s Pain Matrix: fMRI and BOLD Study in Rats.

  • Authors: F. Pellicer, J. M. Ortega-Legaspi, S. Solís Nájera, L. Magis-Weinberg, M. León Olea, A. Graff Guerrero, C. de la Fuente Sandoval, A. Rodríguez.
  • Journal: Journal of Pain Research, 2022, 15, 857.
  • DOI: 10.2147/JPR.S349840.

Title: External Waveguide Magnetic Resonance Imaging for lower limbs at 3 T.

  • Authors: F. Vazquez, O. Marrufo, S. E. Solis-Najera, R. Martin, A. O. Rodriguez.
  • Journal: Medical Physics, 2021.
  • DOI: 10.1002/mp.15281.

Title: Electric field sensing with a modified SRR for wireless telecommunications dosimetry.

  • Authors: F. Vazquez, A. Villareal, A. O. Rodriguez, S. E. Solis-Najera, R. Martin, O. Marrufo.
  • Journal: Electronics, 2021, 10(3), 295.
  • DOI: 10.3390/electronics10030295.

Dr. Rodriguez’s research spans diverse aspects of MRI technology, from innovative coil designs to studying the neural effects of thermal nociception, showcasing his multidisciplinary expertise. 🔍🔬

 

Abdullah M. Al-Ansi | Education Management | Fast Cited Article Award

Published on by Best Paper Awards
Assist Prof Dr. Abdullah M. Al-Ansi, Dhofar University, Yemen, Education Management, Fast Cited Article Award

Bio Summary:

Dr. Abdullah M. Al-Ansi is an Assistant Professor with a diverse academic background and a passion for contributing to the fields of Political and Social Science, Management (HRM), and Telecommunication Engineering. Born on January 1, 1984, in Thamar, Yemen, he holds Yemeni nationality and has permanent residence in Indonesia. Currently, he serves as a Visiting Lecturer at Universitas Muhammadiyah Yogyakarta, Indonesia, and is a Research Fellow at INTI International University, Malaysia. Dr. Al-Ansi earned his Ph.D. degrees from Universitas Muhammadiyah Malang (UMM) and Universitas Islam Negri Maulana Malik Ibrahim (UIN), demonstrating his dedication to academic excellence. With expertise in both quantitative and qualitative data analysis, he is proficient in various tools such as SPSS, Eviews, Stata, Amos, and Excel. Dr. Al-Ansi is a multilingual academic, fluent in English, Arabic, and Indonesian, and is actively engaged in educational platforms, methodologies, and research. His commitment to academic service is evident through memberships in various academic organizations and editorial boards, showcasing his holistic approach to education, research, and professional development.📚🌍

Professional Profile:

🎓 Education:

Ph.D. in Political and Social Science

  • Universitas Muhammadiyah Malang (UMM), Indonesia
  • September 2017 – May 2020

Ph.D. in Management (Human Resource Management – HRM)

  • Universitas Islam Negri Maulana Malik Ibrahim (UIN), Malang, Indonesia
  • March 2015 – November 2017

Master of Business Administration (MBA) in Business Administration

  • Universitas Brawijaya (UB), Malang, Indonesia
  • September 2013 – March 2015

Bachelor of Science (BSc) in Telecommunication Engineering

  • Khaje Nasir Toosi University (KNTU), Tehran, Iran
  • September 2008 – February 2013

Publication Top Noted:

Title: The role of e-learning infrastructure and cognitive competence in distance learning effectiveness during the COVID-19 pandemic.

  • Authors: A Garad, AM Al-Ansi, IN Qamari
  • Journal: Jurnal Cakrawala Pendidikan
  • Year: 2021
  • Volume: 40 (1)
  • Pages: 81-91

Title: Survey on Intelligence Edge Computing in 6G: Characteristics, Challenges, Potential Use Cases, and Market Drivers.

  • Authors: A Al-Ansi, AK Abdullah, M. Al-Ansi, Ammar, Muthanna, Ibrahim A. Elgendy
  • Journal: Future Internet
  • Year: 2021

Title: ICT-based learning during Covid-19 outbreak: Advantages, opportunities and challenges

  • Authors: AM Al-Ansi, A Garad, A Al-Ansi
  • Journal: Gagasan Pendidikan Indonesia
  • Year: 2021
  • Volume: 2 (1)
  • Pages: 10-26

Title: Impact of Information and Communication Technology (ICT) on different settings of learning process in developing countries

  • Authors: AM Al-Ansi, I Suprayogo, M Abidin
  • Journal: Science and Technology
  • Year: 2019
  • Volume: 9 (2)
  • Pages: 19-28

Title: Applying Information Technology-Based Knowledge Management (KM) Simulation in the Airline Industry

  • Author: AM Al-Ansi
  • Journal: International Journal of New Practices in Management and Engineering
  • Year: 2021
  • Volume: 10 (02)
  • Pages: 41

Title: Analyzing augmented reality (AR) and virtual reality (VR) recent development in education

  • Authors: AM Al-Ansi, M Jaboob, A Garad, A Al-Ansi
  • Journal: Social Sciences & Humanities Open
  • Year: 2023
  • Volume: 8 (1)
  • Pages: 100532

Title: Investigating Characteristics of Learning Environments during the COVID-19 Pandemic: A Systematic Review.

  • Author: A Al-Ansi
  • Journal: Canadian Journal of Learning and Technology
  • Year: 2022
  • Volume: 48 (1)
  • Pages: n1

Academic Organization Membership:

👨‍💼 In the academic community, Dr. Al-Ansi is an active member of various organizations, including the Institute For Engineering Research and Publication (IFERP) and ASDF International. He has organized and reviewed international conferences and serves on the editorial boards of prestigious journals like the Journal of Educational Technology Development and Exchange (JETDE).

Research Focus:

Dr. Abdullah M. Al-Ansi, an Assistant Professor, has a diverse research focus spanning the realms of Political and Social Science, Management (HRM), and Telecommunication Engineering. His scholarly pursuits include investigating the impact of social media influencers on adolescent behavior, exploring the development of augmented reality (AR) and virtual reality (VR) in education, and analyzing innovative responses to exogenous shocks in Indonesian transportation firms. Dr. Al-Ansi’s research extends to areas such as sustainable performance, organizational justice, e-learning effectiveness during the COVID-19 pandemic, and intelligence edge computing in 6G. With a commitment to staying at the forefront of knowledge, he has actively contributed to top-tier journals and international conferences, earning him accolades such as the Outstanding Reviewer award. Dr. Al-Ansi’s dedication to research reflects a multidisciplinary approach, addressing contemporary challenges and fostering advancements in various fields.

 

Mohamed Henini | Physics and Astronomy | Best Researcher Award

Published on by Best Paper Awards
Prof Dr. Mohamed Henini, University of Nottingham, United Kingdom, Physics and Astronomy, Best Researcher Award

Bio Summary:

Prof. Dr. Mohamed Henini, a distinguished physicist, holds the position of Professor of Applied Physics at the University of Nottingham, UK. With a background in Technical Mathematics and a Ph.D. in Solid State Physics, he has been a key figure in the field for decades. Prof. Henini’s illustrious career includes roles such as Research Officer and Senior Experimental Officer, showcasing his commitment to scientific exploration. Notable for receiving the “Outstanding Research Supervisor 2023” award, he is also recognized as a Fellow of the African Academy of Sciences. His extensive research contributions, spanning over 930 publications, delve into nanoscience and nanotechnology, covering topics from quantum dots to superconductors. Beyond his academic pursuits, Prof. Henini actively engages in international collaborations, serving on evaluation panels and contributing to conferences. His career stands as a testament to his dedication to advancing physics and nurturing a thriving research community.

Professional Profile:

🎓 Education:

Prof. Dr. Mohamed Henini’s educational journey is marked by a strong foundation in technical mathematics and a subsequent focus on electronics and solid-state physics. Here are the key milestones in his academic qualifications:

Baccalaureat (1975):

  • Technical Mathematics
  • Lycee les Palmiers, Oran, Algeria

Master of Philosophy (1979):

  • Electronics
  • University of Oran, Algeria

Doctor of Philosophy (1984):

  • Solid State Physics
  • University of Nottingham, Department of Electrical & Electronics Engineering, UK

Prof. Henini’s academic path reflects a progression from foundational mathematics to advanced studies in electronics and solid-state physics, culminating in a Ph.D. that positioned him at the forefront of his field.

Publication Top Noted:

“Carrier thermal escape and retrapping in self-assembled quantum dots“

  • Authors: S Sanguinetti, M Henini, MG Alessi, M Capizzi, P Frigeri, S Franchi
  • Published in Physical Review B, 1999
  • Cited 406 times

“Photodegradation of organic pollutants RhB dye using UV simulated sunlight on ceria based TiO2 nanomaterials for antibacterial applications“

  • Authors: K Kasinathan, J Kennedy, M Elayaperumal, M Henini, M Malik
  • Published in Scientific Reports, 2016
  • Cited 393 times

“Paramagnetic Meissner effect in small superconductors“

  • Authors: AK Geim, SV Dubonos, JGS Lok, M Henini, JC Maan
  • Published in Nature, 1998
  • Cited 339 times

“Real‐time scanning Hall probe microscopy“

  • Authors: A Oral, SJ Bending, M Henini
  • Published in Applied Physics Letters, 1996
  • Cited 329 times

“Two-dimensional electrons in a lateral magnetic superlattice“

  • Authors: HA Carmona, AK Geim, A Nogaret, PC Main, TJ Foster, M Henini, and others
  • Published in Physical Review Letters, 1995
  • Cited 316 times

“Dilute nitride semiconductors“

  • Author: M Henini
  • Published in Elsevier, 2004
  • Cited 310 times

“Probing the hole dispersion curves of a quantum well using resonant magnetotunneling spectroscopy“

  • Authors: RK Hayden, DK Maude, L Eaves, EC Valadares, M Henini, FW Sheard, and others
  • Published in Physical Review Letters, 1991
  • Cited 277 times

“Resonant tunneling through the bound states of a single donor atom in a quantum well“

  • Authors: MW Dellow, PH Beton, C Langerak, TJ Foster, PC Main, L Eaves, and others
  • Published in Physical Review Letters, 1992
  • Cited 254 times

ACADEMIC SERVICES:

Prof. Henini’s impact goes beyond academia, participating in outreach activities and contributing to international networks focused on nano and micro photonics technologies. His dedication to research, teaching, and service reflects a career marked by excellence and a passion for advancing scientific knowledge.

HONORS AND DISTINCTIONS:

🏆 Prof. Henini’s honors include being a Fellow of the African Academy of Sciences and participating in various international committees and evaluations. Notably, he played a vital role in evaluating research proposals for the European Union and the Engineering and Physical Sciences Research Council.

Research Focus:

Prof. Dr. Mohamed Henini’s research focuses on the exploration of low-dimensional structures and devices, particularly those grown through molecular beam epitaxy (MBE). His extensive contributions span various aspects of solid-state physics, epitaxial semiconductors, and the growth, characterization, and exploitation of III-V compound semiconductors. Prof. Henini’s expertise lies in the development and analysis of semiconductor nanostructures, contributing to advancements in quantum materials and molecular beam epitaxy.

His work is not only characterized by numerous publications but also includes a patent on “Excitonic Bose-Einstein Condensate (BEC) As Qubits Using Semiconductor Nanostructures For Quantum Technologies.” This patent showcases his involvement in cutting-edge research with potential applications in quantum technologies.

Overall, Prof. Henini’s research endeavors demonstrate a commitment to advancing the understanding of condensed matter physics and the practical applications of semiconductor nanostructures, marking him as a prominent figure in the field.

 

Arefeh Sadat Fathi | Indoor environmental quality | Best Researcher Award

Published on by Best Paper Awards
Mrs. Arefeh Sadat Fathi, Carleton University, Canada, Indoor environmental quality, Best Researcher Award

Summary:

Arefeh Sadat Fathi is a Ph.D. student in Building Engineering at Carleton University, Ottawa, Canada, commencing her studies in September 2019. Under the guidance of Prof. William O’Brien, her research explores “Design decisions and indoor environmental quality at the early stages of design.” Arefeh holds an M.Sc. in Architecture from Yazd University, Iran, where she achieved the second-highest rank. Her thesis, “Earth Sheltered Cultural Complex Design In Yazd,” reflects her dedication to sustainable architecture. With a B.Sc. in Architecture from Azad University, Isfahan, she ranked fifth and designed a Cultural Center promoting social interaction. Arefeh’s academic excellence has been recognized with honors, awards, and grants, including being ranked second among M.Sc. students in Architecture at Yazd University. As a recipient of a tuition bursary at Carleton University, Arefeh continues to excel in her academic pursuits with enthusiasm and dedication.

Professional Profile:

🎓 Education:

🏡 Arefeh Sadat Fathi is a dedicated Ph.D. student in Building Engineering at Carleton University, Ottawa, Canada, since September 2019. Under the guidance of Prof. William O’Brien, her research focuses on “Design decisions and indoor environmental quality at the early stages of design.” 📚 Holding an M.Sc. in Architecture from Yazd University, Iran, where she ranked second, Arefeh’s commitment to sustainable architecture is evident in her thesis on “Earth Sheltered Cultural Complex Design In Yazd.” Her architectural journey began with a B.Sc. in Architecture from Azad University, Isfahan, where she ranked fifth and designed a Cultural Center fostering social interaction.

Publication Top Noted:

Arefeh Sadat Fathi has made significant contributions to the field of building engineering and architecture, as evidenced by her impactful research publications:

Title 1: “Office Design Decisions and Indoor Environmental Quality: A Parametric Design and Simulation-Based Workflow” (2022)

Presented at the COBEE Conference in Montreal, Canada, from July 25-29, 2022.

Title 2: “A simulation-based approach for evaluating indoor environmental quality at the early design stage” (2023)

Published in the Journal of Science and Technology for the Built Environment (STBE), spanning from page 1 to 29. The paper delves into a simulation-based methodology for assessing indoor environmental quality during the early stages of design. The DOI for this publication is https://doi.org/10.1080/23744731.2023.2187611.

Title 3: “Impact of different indoor environmental weighting schemes on office architectural design decisions in different climates” (2023)

Presented at the Healthy Building Conference in Aachen, Germany, held from June 11-14, 2023.

Title 4: “Impact of indoor environmental quality weighting schemes on office architectural design decisions” (2023)

Published in the Journal of Building and Environment. The paper explores the influence of indoor environmental quality weighting schemes on decision-making in office architectural designs. The DOI for this publication is https://doi.org/10.1016/j.buildenv.2023.111075.

These publications underscore Arefeh’s dedication to advancing knowledge in her field and her commitment to understanding and improving indoor environmental quality in various architectural contexts.

Experiences:

🌐 Actively engaged in research and teaching assistance at Carleton University, Arefeh significantly contributes to projects like the Annex 79 Project and the SUSTAIN Group, showcasing her multidisciplinary approach. Her practical experience encompasses projects like creating and analyzing energy regression models.

Honors Awards and Grants:

👩‍🎓 Arefeh’s academic prowess is underscored by honors, awards, and grants, notably ranking second among all M.Sc. students in Architecture at Yazd University. Acknowledged for innovative designs in architecture competitions, she is also a recipient of a tuition bursary at Carleton University. Arefeh continues to excel in her academic pursuits with unwavering dedication and enthusiasm.

Research Focus:

Arefeh Sadat Fathi’s research focuses on the intersection of building engineering and architecture, with a primary emphasis on “Design decisions and indoor environmental quality at the early stages of design.” Her work delves into understanding the crucial choices made during the initial phases of architectural design and their impact on indoor environmental quality. This research is integral for creating sustainable and occupant-friendly built environments.

Key aspects of her research include:

Parametric Design and Simulation-Based Workflow: Arefeh explores the integration of parametric design principles and simulation-based methodologies to inform decision-making in office design, particularly with regards to indoor environmental quality.

Simulation-Based Evaluation of Indoor Environmental Quality: Arefeh employs a simulation-based approach to evaluate indoor environmental quality during the early design stages. This involves assessing various factors contributing to the overall quality of the indoor environment.

Climate Impact on Architectural Design Decisions: Investigating how different climates influence architectural design decisions, particularly in the context of office spaces. This research considers the unique challenges and opportunities presented by diverse environmental conditions.

Weighting Schemes and Design Decision Impact: Arefeh explores the impact of different indoor environmental quality weighting schemes on decision-making in office architectural designs. This includes understanding how varying prioritization of factors influences the final design outcomes.

Her research contributes to the broader fields of sustainable architecture, building engineering, and indoor environmental quality, aiming to enhance the understanding of early-stage design decisions and their implications for creating healthier and more efficient built environments.

 

 

Liming Dai | Biomaterials

Published on by Best Paper Awards
Prof Dr. Helmut Spitzer Oladipo: Leading Researcher in Biomaterials

Summary:

Liming Dai is a distinguished figure in the field of carbon science and innovation. He obtained his B.S. in Chemical Engineering from Zhejiang University in 1983, followed by a Ph.D. in Chemistry from the Australian National University in 1991. His academic journey includes postdoctoral research at the Cavendish Laboratory, Cambridge, and a visiting fellowship at the University of Illinois at Urbana in 1992. Director of the ARC Centre of Excellence for Carbon Science and Innovation, Liming Dai has held esteemed positions, including Scientia Professor and ARC Laureate Fellow at the University of New South Wales. His expertise encompasses nanomaterials, materials science, and engineering.

Professional Profile:

🎓 Education and Training: Liming Dai earned a B.S. in Chemical Engineering from Zhejiang University in 1983, followed by a Ph.D. in Chemistry from the Australian National University in 1991. He conducted postdoctoral research in Physics at the Cavendish Laboratory, Cambridge, from 1990 to 1992 and was a visiting fellow at the University of Illinois at Urbana in 1992.

🔬 Research and Professional Experience: Currently serving as the Director of the ARC Centre of Excellence for Carbon Science and Innovation, Liming Dai has held various prestigious positions, including Scientia Professor and ARC Laureate Fellow at the University of New South Wales. His expertise spans nanomaterials, materials science, and engineering.

🏆 Leadership and Management Experience: Dai’s leadership roles include Director of the Australian Carbon Materials Centre, Director of the Center of Advanced Science and Engineering for Carbon, and leadership in initiatives such as the US Department of Defense Multi-University Research Initiative.

Honours and Awards: Among his many accolades, Dai is a Fellow of the Australian Academy of Science, a member of Academia Europaea, and a Fellow of the (US) National Academy of Inventors. He has received numerous awards, including the NASA-Langley Henry J.E. Reid Award and the Advanced Materials Hall of Fame recognition.

📚 Selected Professional Activities: Dai is actively involved in editorial roles for prestigious journals, such as Nano Energy and Frontiers in Materials. He serves on advisory boards for several publications and is a member of various international committees, contributing significantly to the scholarly community.

👨‍🏫 Selected Education Achievements: Over the years, Dai has supervised numerous postgraduate students and postdoctoral researchers, playing a pivotal role in their academic success. Many of his mentees have excelled in academia, securing positions and fellowships globally.

🌐 Selected Professional Achievements: A pioneer in carbon materials, Dai’s impactful contributions include the discovery of heteroatom-doping effects in graphene and the development of carbon-based metal-free electrocatalysts for renewable energy applications. His work has garnered international recognition and commercialization efforts.

📖 Books: Dai has authored and edited several books, including “Intelligent Macromolecules for Smart Devices” and “Carbon-Based Metal-Free Catalysts: Design and Applications,” reflecting his commitment to knowledge dissemination.

💰 Funding and Impact: Dai has secured over AU$100 million in external funding during the past two decades, highlighting the significance and impact of his research in the field of carbon science and innovation.

Publication Top Noted: 

Liming Dai has made significant contributions to the field of carbon materials, particularly in the development of electrocatalysts for various applications. Here are some of his notable publications:

“Nitrogen-doped carbon nanotube arrays with high electrocatalytic activity for oxygen reduction”

  • Authors: K Gong, F Du, Z Xia, M Durstock, L Dai
  • Published in Science in 2009
  • Citations: 7200

“Nitrogen-doped graphene as an efficient metal-free electrocatalyst for oxygen reduction in fuel cells”

  • Authors: L Qu, Y Liu, JB Baek, L Dai
  • Published in ACS Nano in 2010
  • Citations: 4156

“A metal-free bifunctional electrocatalyst for oxygen reduction and oxygen evolution reactions”

  • Authors: J Zhang, Z Zhao, Z Xia, L Dai
  • Published in Nature Nanotechnology in 2015
  • Citations: 2847

“Metal-free catalysts for oxygen reduction reaction”

  • Authors: L Dai, Y Xue, L Qu, HJ Choi, JB Baek
  • Published in Chemical Reviews in 2015
  • Citations: 2232

“Nitrogen-doped graphene quantum dots with oxygen-rich functional groups”

  • Authors: Y Li, Y Zhao, H Cheng, Y Hu, G Shi, L Dai, L Qu
  • Published in the Journal of the American Chemical Society in 2012
  • Citations: 1997

“Plasma‐Engraved Co3O4 Nanosheets with Oxygen Vacancies and High Surface Area for the Oxygen Evolution Reaction”

  • Authors: L Xu, Q Jiang, Z Xiao, X Li, J Huo, S Wang, L Dai
  • Published in Angewandte Chemie in 2016
  • Citations: 1971

“Carbon nanomaterials for advanced energy conversion and storage”

  • Authors: L Dai, DW Chang, JB Baek, W Lu
  • Published in Small in 2012
  • Citations: 1804

“Scalable synthesis of hierarchically structured carbon nanotube–graphene fibers for capacitive energy storage”

  • Authors: D Yu, K Goh, H Wang, L Wei, W Jiang, Q Zhang, L Dai, Y Chen
  • Published in Nature Nanotechnology in 2014
  • Citations: 1376